Home Flooring 5 Timber Floor Restoration Mistakes to Avoid

5 Timber Floor Restoration Mistakes to Avoid

by harmanpreet Singh
Floor Repairs Melbourne

When done right, restoring your hardwood timber floors can completely transform your home, making it look brand new again. Hiding underneath most dull and worn hardwood floors is something truly spectacular and beautiful, and a quick makeover really can make a world of difference.

Unfortunately, many mistakes can be made throughout this process that can jeopardise the final result. To help you keep your floors as pristine as possible, here are 5 commonly made mistakes to avoid when restoring your hardwood timber floors.

  1. Using the wrong equipment

One of the most commonly made mistakes when restoring hardwood flooring is using the wrong sandpaper. A lot of folks worry about potentially damaging or destroying their floors so they use sandpaper that’s too lightweight and fine.

This means that the sandpaper will clog up easily and make the job much more difficult and time-consuming, lacking efficiency and ultimately the results that you’re after. This is why we always recommended working with the professionals when undergoing floor repairs or maintenance, as they’ll know exactly what type of sandpaper to use to achieve the desired end product.

  1. Improper sanding

Another problem many people face when sanding their floors is that they don’t sand it enough or do it in the wrong direction. Sanding floors is hard work, and too often people fail to remove all of the previous finish before moving on to the next step. Hardwood should always be sanded in line with the grain, as this will result in the fastest and most even results.

Timber Floor Sanding

Also, if your floorboards aren’t completely flat then the sanding machine may skip over certain patches of the timber. If you notice this happening, you can remove them with a little elbow grease to avoid missing any spots.

  1. Incorrect edging

Sanding the edges of your hardwood timber can be a pain, and is often the most dreaded part of the process. The good news is that you don’t actually have to sand the edges of your floors as much as the rest, making your life just that little bit easier.

While you’ll want to work down to 120 grit sandpaper for the main surface areas of your floor, for the edges you’ll only have to get down to around 80 to make the process quicker and easier.

  1. Failure to remove wood dust before painting or staining

Before you paint or stain your timber floors, you need to make sure that all wood dust and other dirt and debris have been completely removed from the scene. If you fail to do this, it’ll get trapped under the new coat of paint or stain and all your hard work will have been for nothing.

If this happens, you’ll be left with no choice but to start from scratch and re-sand your floors or simply put up with a permanently dirty, uneven floor.

  1. Using the wrong coatings or paint

Once you’ve sanded and cleaned your floors, it’s finally time to apply your final coating of stain or paint. After going to all this effort, it would be a shame to mess everything up on the final step. That’s why we recommend investing in a high-quality, durable and long-lasting finish that will stand the test of time and help your floors look their very best.

Going with a cheaper option will undermine all the hard work you’ve put in and leave you with a final product that may be underwhelming. Put in some research and shop around until you find the product you’ve been looking for, making all the hard work with it in the end.

Don’t forget to call in the professionals if this task feels daunting or overwhelming. This way you know you’ll get the results of your dreams, all without the stress and anxiety of anything going wrong by your hands.

Related Articles